Sanela
Nemo Sensor Tap

SANELA NEMO SENSOR MEDICAL TAP

Sensor activated Sanela tapware – Cold & hot water regulated by integrated thermostatic mixer

  • Hygienic 
    Touch free washing with adjustable hygiene flush (interval and duration)

  • Water efficient and reliable 
    Eliminates water wastage, water is delivered as and when required

  • 6-Star WELS rating
    6-Star taps use the least amount of water, often reducing consumption by more than 50% compared to lower-rated products

  • Suitable for medical facilities
    Regulated water temperature and non-touch activation

  • Product Code: 

    SST25AC (Mains)

Sanela Nemo Sensor Tap

SPL’s products are available throughout New Zealand and overseas.
Call us on 0800 787 736 (Monday – Friday 8am to 4.30pm) and our team will direct you to the nearest reseller in your area.


  • Swivel spout

    For the ultimate clean, water will flow as long as the person is within the active range

  • Discrete electromagnetic valve

    The electromagnetic valve (solenoid) is hidden within the body of the facet.

  • Infrared automatic technology

    Intelligent automatic logic system sensor controls the flow, water starts when hands are in active range. Adjustable sensing distance and time delay can be set

  • European design and manufacture

    Long standing European manufacturer - high quality electronics combined with elegant aesthetics

  • Automatic water stop functionality

    Perfect in areas where control of water usage is necessary, a handy setting allowing water to cease supply after 5 minutes of continuous flow

  • Maximum water efficiency

    6-Star WELS tap uses as little as 3.5 litres per minute compared to 9 litres per minute for a 3-Star tap, saving thousands of litres of water annually per tap

Specification

Finish
Chrome

Water Temperature
Cold & hot water regulated by integrate thermostatic mixer (hot & cold pressure must be equal)

Power Supply
Mains – 230V AC, 50 Hz (input) – 24V (output)

Control
Infrared sensing

Operating Voltage
Mains 24V DC, 3W

Active Range
Standard 0.6 – 0.75 m, START/STOP program 0.25 – 7.75 secs

Recommended Flow Pressure
0.1 – 0.6 Mpa (1-6 Bar)

Rate of Flow
3.8 L/min (6 L/min or 1.9L/m available on request)

Water Inlet
Male thread G 1/2″

Dimensions
Depth 244mm, width 263mm

Warranty
24 months

  • Accreditation

    6 Star WELS rating
    (tested in NZ)

  • Finish

    Chrome

  • Water Temperature

    Integrated thermostatic mixer (hot & cold pressure must be equal)

  • Suggested Applications

    Cafes, bars, restaurants, accessible washrooms, schools, single cubicle toilets, retirement villages, universities, shopping centres medical facilities, factories, offices, airports, stadiums, tourist attractions, accommodation providers

Downloads