Sanela
Flush Controller
Urinal water control unit. Be environmentally friendly with this leading edge water saving technology
Wall mounted urinal infra-red flushing unit and integrated power supply (Mains 230V AC)
-
Touchless flush control
System reacts to the user attendance in front of the urinal at a maximum distance of 0.7m, minimum stay time in active range is 7.5 secs -
Hygienic and controls odour
Keeps urinals fresh without the need for human intervention. Automatic janitor flush after 24 hours of non-use -
Adjustable flushing time
0.5 – 15.5 secs also possible to regulate water value with ball valve
Sanela Flush Controller
-
Courtesy flush
Water only flows after the user leaves active range
-
Adjustable parameters via remote
Active range; Flush delay; Janitor flush
-
European design and manufacture
Long standing European manufacturer - high quality electronics combined with elegant aesthetics
Specification
Power Supply
230V AC
Location
Wall mounted above the urinal
Control
Infra-red sensor
Stainless Steel Cover Dimension
170 x 170 x 10mm
Mounting Box Dimension
140 x 140 x 75mm
Operating voltage
230 V AC 50Hz
Active Range
0.6 – 0.75 m
Recommended Flow Pressure
0.1 – 0.6 Mpa (1-6 Bar)
Rate of flow
18 L/min (inf. Data)
Water Inlet
Male thread G 3/4″
Water Outlet
Male thread G 3/4″
Warranty
24 months
-
Location
Wall mounted above the urinal (Stainless steel cover enables access to service valves)
-
Control
Infrared sensor
-
Active Range
0.6-0.75m
-
Suggested Applications
Single stall urinals – shopping malls, hotels, airports, stadiums, public toilets, tourist operations, offices